Front Suspension
- Rack and Pinion Gaiters with screw
down metal clamps
- Steering tie-rod ends
- Inner and Outer Wheel Bearings and
Seals - shimmed to 0.002".
- Brake Rotors and pads - cross ground
and balanced
- Stainless Steel Brake Hoses
- Full Polyurethane Bushing Set
- King Pin assy's ( YB swap )
- Driver's Side Shock Absorber ( YB swap
)
- 8 spoke Alloy Wheels with Michelin MXV
175/14s ( YB swap )
-
- World Wide Import Rebuilt Shocks with rotary seals
(3/00)
- Complete front end rebuild - new a-arms, bushes, bolts,
etc 9/00
Rear
Suspension
- Leaf Spring - 7 leaf stock GT
- U-Bolts and nuts
- Full Polyurethane Bushing Set
- Stainless Steel Flexible Brake Hoses
- Panasport Mini-lite Alloy Wheels with
Michelin MXV 175/14s ( YB swap )
- Gabriel Tube Shock conversion
(1/99)
-
- World Wide Import Rebuilt Shocks with rotary seals
(3/00)
-
- Brake shoes and wheel cylinders (5/01)
Interior
- Stripped and cleaned all of the gauges
- Striped and cleaned all the switch contacts
on the steering column
- Custom in-harness alarm wire routing
- Repaired PO wiring harness abuse and
re-wrapped under dash harness
- Interior Courtesy Light
- Ceiling rear hatch light
- Deluxe Autumn Leaf Carpet Set ( YB
swap )
- (Five layers of padding and sound deadening)
- Deluxe Autumn Leaf Interior ( YB swap )
- Autumn Leaf Headliner and Headrail Trim ( YB
swap )
- Autumn Leaf Side Panels and Quarter Trim (
YB swap )
- Autumn Leaf Front Seats w/ new foam ( YB
swap )
- Autumn Leaf Vinyl & Cloth rear seat ( YB
swap )
- Burlwood Dash and Console
- Console Centering Guide and new pin
- Fog Lamp Switch
- Voltmeter and Vacuum gauges
- MG Logo Rubber floor mats x 2
- Steering Column center shaft and upper
bushing assembly ( YB swap )
- Moto-Lita Drilled three spoke chrome
steering wheel ( YB swap )
- 4 Speaker stereo cassette (yes 4 fit!)
- Inertia Reel Retractable Shoulder/lap
Seat Belts
- Wood bead seat cushions ( I hate sweating to the vinyl seat)
For Convenience
- AM/FM Cassette 4 speaker Stereo
Engine Compartment
- Brand NEW AUD405 HS4 Carbs
- (AAA needles, red springs, and soldered
poppet valve)
- Heat shield sanded and painted
- Intake manifold polished
- K&N Air Filter Set w/ MG logo Plate
- 41491 25D Distributor cleaned and
rebuild
- New 54425359 vacuum advance unit
(10.15.5)
- Petronix Electronic Ignition Module
- Lucas Gold Sports Coil - 40,000
volt
- Peco 2" free flow
exhaust header
- Peco 2" free flow exhaust -
muffler and pipe
- 2" diameter chrome exhaust tip
- Alarm system components
- Fuse Block rebuilt
- Engine Bay surface cleanup and re-paint
- Evap. Canister to Float bowl vent hoses
- Evap. Canister to Valve Cover vent hose
- Evap. Canister to Gas Tank vent hose
- Anti-run-on valve
- Sound mat on bonnet
- Foam Radiator/Diaphragm Seal
- Front Bonnet Buffer (bumpers) x2
- Wiring Harness cleaned up and
re-wrapped
- Champion NR9YC Spark Plugs at 0.028 gap
- Valve clearances adjusted (floated
wear)
Body and exterior
- hand buffed paint cleaning, polishing, and
wax
- Vent Window Seals both doors
- Outer Waist Seals on both doors
- Rear Quarter window seals ( YB swap )
- Main Door Seals w/ mitered corners both
doors
- Rear Bumper Mounts doubled bracketed
- Headlight fixture to body gaskets
- Back Up Lamp Lenses
- Back Up Lamp Lenses Seals
- Back Up Lamp fixture to body gaskets
- Side Marker light Plinths x 4
lights
- Side Marker Lenses seals x
4 lights
- Tail Light Lens Seals
- Tail Light fixture to body gaskets
- Sebring Headlamp covers and fittings
- MGBGT logo on hatch ( YB swap )
- touch up paint
- Waxoyl treatment - all crevices and seems
- Front Wheel Arch cleanup and undercoating
-
- Very clean NOS chrome Front bumper
- Complete Front grill
|
